Brahma Ignition Transformer T8 series

The T8 Series transformers are suitable for high thermal power burners or pressurised burners for light or heavy oil.

CONSTRUCTIONThis series consists of column-type transformers, i.e. ignitiontransformers fitted with 2 primary windings and 2 secondarywindings, except for type T16/D which is a shell -typetransformer. All types are isolated by a special high isolationseparator. High voltage isolation is achieved by means of aspecial kind of vacuum cast polyester resin.The housing is made of stove enamelled pressed metal.Each transformer is specified by the letter T (transformer), byone or more figures indicating the model and sometimes bysome letters referring to the particular fixing system, i.e.:

CONNECTION According as the connection with high voltage cables occurs by means of a screw or of a 6.3 diameter cylindrical terminal type Rajah. If not expressly mentioned, the connection terminal used is a screw terminal. Both isolators are made of ceramic. 

INSTALLATION-  Connect and disconnect the ignition transformer only afterswitching off the power supply.-  Respect the applicable national and European standards(e.g. EN 60355-1 / EN 50165) regarding electrical safety.-  Make sure that the earth of the transformer and the earthof the electric system are well connected.-  The device can be mounted in any position.-  Do not put high voltage cables next to other cables.-  Guarantee a protection degree suitable to the application.

Brahma Ignition Transformer T8 series